104×104 grid · perler bead
About this pattern
This is a 104×104 perler bead pattern using 34 colors and 2916 beads. Difficulty is advanced and a typical project takes about 83 minutes including ironing. Open it in the maker to remix the palette across Perler, Hama, Artkal, or convert into a cross-stitch / pixel-art / LEGO grid.
Pattern stats
- Grid size
- 104×104
- Total beads
- 2916
- Colors
- 34
- Difficulty
- Advanced
- Time
- ~83 min
- Pegboard
- extended (tile multiple 52×52 mini (2.6 mm) boards)
Supplies
You’ll need 2916 beads across 34 colors, plus a pegboard, parchment paper, and a household iron.
- Pegboard (extended (tile multiple 52×52 mini (2.6 mm) boards))
- Iron + parchment / ironing paper
- 589 × Deep Muted Red
- 519 × Black
- 306 × Charcoal
- 170 × Orange
- 148 × Grey
- 127 × Pale Amber
- 111 × Dark Grey
- 105 × Chestnut
- 98 × Off White
- 96 × Silver
- 85 × Muted Orange
- 72 × Pale Violet
- 68 × Muted Orange
- 58 × White
- 52 × Espresso
- 50 × Pale Orange
- 43 × Muted Yellow
- 42 × Grey
- 39 × Muted Red
- 23 × Chestnut
- 19 × Light Muted Blue
- 17 × Brown
- 11 × Dark Muted Red
- 11 × Pale Muted Red
- 8 × Light Yellow
- 8 × Yellow
- 7 × Chestnut
- 7 × Deep Orange
- 7 × Pale Teal
- 6 × Light Yellow
- 5 × Grey
- 5 × Pale Yellow
- 2 × Light Orange
- 2 × Light Orange
How to make this pattern
- Lay the pegboard flat and gather the bead colors listed above. A small bowl per color speeds placement.
- Place each bead on the pegboard following the chart — work row-by-row so you don’t lose your spot.
- Cover the finished design with a sheet of parchment or ironing paper, fully flat against the beads.
- Iron on medium heat (about 350°F / 175°C) for 10–15 seconds, moving in slow circles until beads fuse evenly.
- Let the piece cool fully — about 1 minute — then peel off the parchment.
- For a stronger fuse, flip the piece and iron the back side the same way. This is what we call double-sided ironing.
Tips
- Always use parchment paper. Direct iron contact warps individual beads and destroys the grid spacing.
- Keep the iron moving in slow circles. Pressing in one spot creates flat dimples in the finished piece.
- Pop the cooled piece in the freezer for 30 seconds before peeling parchment — it releases cleaner that way.
FAQ
How many beads do I need for the 小黑骑士 pattern?
You need 2916 beads total. The breakdown by color is: 589 deep muted red, 519 black, 306 charcoal, 170 orange, 148 grey, 127 pale amber. Stocking 10–20% extra of each color is a safe margin in case any beads are off-color or get crushed during ironing.
What size pegboard do I need?
A extended (tile multiple 52×52 mini (2.6 mm) boards) pegboard fits the 104×104 grid. The standard 29×29 Perler / Hama / Artkal square pegboard is the most common size and covers everything up to 29 cells across.
How long does it take to make?
Plan for about 83 minutes total — roughly 73 minutes placing the beads and another 10 minutes for ironing and cooling. Beginners may need 1.5× that on their first few patterns.
Can I use Hama or Artkal beads instead of Perler?
Yes. The colors used in this pattern map cleanly to Hama Midi, Artkal S, and Nabbi palettes. Open the design in the maker, switch the palette in the toolbar, then export the swapped chart before you start ironing.
Is this a beginner-friendly pattern?
This pattern is rated advanced based on grid size and color count. Beginner patterns are under 200 beads and 5 colors; intermediate is up to 600 beads and 10 colors; everything else is advanced.