128×169 grid · pixel art
About this pattern
This is a 128×169 pixel art pattern using 43 colors and 21632 beads. Difficulty is advanced and a typical project takes about 551 minutes including ironing. Open it in the maker to remix the palette across Perler, Hama, Artkal, or convert into a cross-stitch / pixel-art / LEGO grid.
Pattern stats
- Grid size
- 128×169
- Total beads
- 21632
- Colors
- 43
- Difficulty
- Advanced
- Time
- ~551 min
- Pegboard
- extended (tile multiple 50×50 boards)
Supplies
You’ll need 21632 beads across 43 colors, plus a pegboard, parchment paper, and a household iron.
- Pegboard (extended (tile multiple 50×50 boards))
- Iron + parchment / ironing paper
- 9445 × Very Dark Gray
- 6036 × Very Dark Red
- 2629 × Dark Red
- 948 × Red
- 853 × Very Light Muted Orange
- 169 × Charcoal
- 168 × Black
- 165 × Very Dark Muted Red
- 150 × Very Light Muted Red
- 134 × Very Light Muted Red
- 113 × Dark Gray
- 91 × Dark Charcoal
- 65 × Pale Gray
- 63 × Dark Muted Red
- 59 × Dim Gray
- 57 × Dark Red
- 55 × Light Gray
- 51 × Medium Gray
- 45 × Gray
- 45 × Very Dark Muted Orange
- 38 × Silver Gray
- 35 × Very Dark Muted Red
- 33 × Very Light Muted Orange
- 32 × Dark Muted Red
- 31 × Very Dark Red
- 23 × Muted Red
- 16 × Light Red
- 16 × Very Dark Muted Orange
- 14 × Muted Red
- 13 × Light Muted Red
- 9 × Light Red
- 7 × Very Dark Orange
- 6 × Very Dark Muted Rose
- 3 × Dark Muted Orange
- 3 × Very Dark Muted Orange
- 2 × Dark Muted Orange
- 2 × Dark Orange
- 2 × Red
- 2 × Very Dark Muted Rose
- 1 × Dark Muted Orange
- 1 × Light Muted Orange
- 1 × Muted Orange
- 1 × Muted Rose
How to make this pattern
- Lay the pegboard flat and gather the bead colors listed above. A small bowl per color speeds placement.
- Place each bead on the pegboard following the chart — work row-by-row so you don’t lose your spot.
- Cover the finished design with a sheet of parchment or ironing paper, fully flat against the beads.
- Iron on medium heat (about 350°F / 175°C) for 10–15 seconds, moving in slow circles until beads fuse evenly.
- Let the piece cool fully — about 1 minute — then peel off the parchment.
- For a stronger fuse, flip the piece and iron the back side the same way. This is what we call double-sided ironing.
Tips
- Always use parchment paper. Direct iron contact warps individual beads and destroys the grid spacing.
- Keep the iron moving in slow circles. Pressing in one spot creates flat dimples in the finished piece.
- Pop the cooled piece in the freezer for 30 seconds before peeling parchment — it releases cleaner that way.
FAQ
How many beads do I need for the Twisted Blot pattern?
You need 21632 beads total. The breakdown by color is: 9445 very dark gray, 6036 very dark red, 2629 dark red, 948 red, 853 very light muted orange, 169 charcoal. Stocking 10–20% extra of each color is a safe margin in case any beads are off-color or get crushed during ironing.
What size pegboard do I need?
A extended (tile multiple 50×50 boards) pegboard fits the 128×169 grid. The standard 29×29 Perler / Hama / Artkal square pegboard is the most common size and covers everything up to 29 cells across.
How long does it take to make?
Plan for about 551 minutes total — roughly 541 minutes placing the beads and another 10 minutes for ironing and cooling. Beginners may need 1.5× that on their first few patterns.
Can I use Hama or Artkal beads instead of Perler?
Yes. The colors used in this pattern map cleanly to Hama Midi, Artkal S, and Nabbi palettes. Open the design in the maker, switch the palette in the toolbar, then export the swapped chart before you start ironing.
Is this a beginner-friendly pattern?
This pattern is rated advanced based on grid size and color count. Beginner patterns are under 200 beads and 5 colors; intermediate is up to 600 beads and 10 colors; everything else is advanced.