256×256 grid · pixel art
About this pattern
This is a 256×256 pixel art pattern using 76 colors and 27345 beads. Difficulty is advanced and a typical project takes about 694 minutes including ironing. Open it in the maker to remix the palette across Perler, Hama, Artkal, or convert into a cross-stitch / pixel-art / LEGO grid.
Pattern stats
- Grid size
- 256×256
- Total beads
- 27345
- Colors
- 76
- Difficulty
- Advanced
- Time
- ~694 min
- Pegboard
- extended (tile multiple 50×50 boards)
Supplies
You’ll need 27345 beads across 76 colors, plus a pegboard, parchment paper, and a household iron.
- Pegboard (extended (tile multiple 50×50 boards))
- Iron + parchment / ironing paper
- 6519 × Dark Orange
- 3187 × Orange
- 2618 × White
- 2109 × Orange
- 1458 × Off White
- 1139 × Dark Orange
- 890 × Dark Charcoal
- 882 × Yellow
- 795 × Near White
- 751 × Dark Gray
- 743 × Very Dark Gray
- 661 × Very Dark Orange
- 610 × Dark Yellow
- 494 × Dark Orange
- 474 × Very Dark Orange
- 459 × Dim Gray
- 375 × Light Silver
- 335 × Dark Muted Red
- 284 × Charcoal
- 252 × Light Orange
- 225 × Very Dark Muted Red
- 196 × Dark Muted Orange
- 194 × Mist Gray
- 178 × Gray
- 172 × Muted Yellow
- 144 × Very Dark Orange
- 113 × Black
- 92 × Muted Orange
- 86 × Very Dark Muted Cyan
- 77 × Pale Gray
- 69 × Very Dark Muted Blue
- 66 × Medium Gray
- 57 × Very Dark Muted Orange
- 53 × Light Gray
- 50 × Dark Muted Orange
- 49 × Very Dark Muted Blue
- 48 × Dark Muted Yellow
- 36 × Muted Yellow Green
- 33 × Very Dark Red
- 31 × Very Dark Muted Orange
- 30 × Dark Muted Blue
- 29 × Dark Muted Yellow Green
- 28 × Muted Orange
- 28 × Silver Gray
- 25 × Light Orange
- 24 × Dark Muted Orange
- 24 × Very Dark Muted Orange
- 22 × Very Dark Muted Yellow
- 18 × Very Dark Muted Blue
- 14 × Very Dark Muted Yellow Green
- 13 × Light Yellow
- 9 × Very Dark Muted Teal
- 9 × Very Dark Yellow
- 8 × Very Dark Muted Purple
- 7 × Dark Muted Blue
- 6 × Very Light Muted Blue
- 4 × Dark Muted Purple
- 4 × Light Muted Yellow Green
- 4 × Muted Orange
- 4 × Very Dark Muted Magenta
- 4 × Very Dark Muted Purple
- 4 × Yellow Green
- 3 × Light Muted Blue
- 3 × Very Dark Muted Rose
- 2 × Dark Muted Green
- 2 × Dark Red
- 2 × Muted Red
- 2 × Very Dark Blue
- 2 × Very Dark Muted Rose
- 1 × Dark Muted Cyan
- 1 × Light Orange
- 1 × Light Yellow Green
- 1 × Very Dark Muted Teal
- 1 × Very Light Muted Orange
- 1 × Very Light Muted Purple
- 1 × Very Light Muted Yellow Green
How to make this pattern
- Lay the pegboard flat and gather the bead colors listed above. A small bowl per color speeds placement.
- Place each bead on the pegboard following the chart — work row-by-row so you don’t lose your spot.
- Cover the finished design with a sheet of parchment or ironing paper, fully flat against the beads.
- Iron on medium heat (about 350°F / 175°C) for 10–15 seconds, moving in slow circles until beads fuse evenly.
- Let the piece cool fully — about 1 minute — then peel off the parchment.
- For a stronger fuse, flip the piece and iron the back side the same way. This is what we call double-sided ironing.
Tips
- Always use parchment paper. Direct iron contact warps individual beads and destroys the grid spacing.
- Keep the iron moving in slow circles. Pressing in one spot creates flat dimples in the finished piece.
- Pop the cooled piece in the freezer for 30 seconds before peeling parchment — it releases cleaner that way.
FAQ
How many beads do I need for the Alan Becker channel profile pattern?
You need 27345 beads total. The breakdown by color is: 6519 dark orange, 3187 orange, 2618 white, 2109 orange, 1458 off white, 1139 dark orange. Stocking 10–20% extra of each color is a safe margin in case any beads are off-color or get crushed during ironing.
What size pegboard do I need?
A extended (tile multiple 50×50 boards) pegboard fits the 256×256 grid. The standard 29×29 Perler / Hama / Artkal square pegboard is the most common size and covers everything up to 29 cells across.
How long does it take to make?
Plan for about 694 minutes total — roughly 684 minutes placing the beads and another 10 minutes for ironing and cooling. Beginners may need 1.5× that on their first few patterns.
Can I use Hama or Artkal beads instead of Perler?
Yes. The colors used in this pattern map cleanly to Hama Midi, Artkal S, and Nabbi palettes. Open the design in the maker, switch the palette in the toolbar, then export the swapped chart before you start ironing.
Is this a beginner-friendly pattern?
This pattern is rated advanced based on grid size and color count. Beginner patterns are under 200 beads and 5 colors; intermediate is up to 600 beads and 10 colors; everything else is advanced.