Sobre este padrão

Este é um padrão de pixel art de 38×37 usando 104 cors e 1406 contas. A dificuldade é avançado e um projeto típico leva cerca de 45 minutos incluindo o passar a ferro. Abra-o no maker para adaptar a paleta a Perler, Hama, Artkal ou converter em ponto-cruz / pixel art / LEGO.

Materiais

Você vai precisar de 1406 contas em 104 cors, além de uma placa, papel manteiga e ferro doméstico.

• Placa (large 50×50)
• Ferro + papel manteiga / papel de passar
• 91 × Light Orange
• 82 × Very Light Orange
• 68 × Very Dark Orange
• 57 × Muted Orange
• 50 × Dark Orange
• 38 × Orange
• 35 × Dark Muted Orange
• 34 × Off White
• 34 × White
• 32 × Near White
• 32 × Very Light Muted Yellow
• 31 × Light Teal
• 29 × Dark Orange
• 29 × Very Dark Muted Orange
• 29 × Very Dark Orange
• 26 × Dark Muted Yellow
• 25 × Light Muted Teal
• 25 × Light Muted Yellow
• 25 × Very Light Orange
• 24 × Teal
• 23 × Dark Muted Orange
• 22 × Light Muted Orange
• 22 × Very Dark Gray
• 21 × Very Dark Muted Orange
• 21 × Very Dark Muted Red
• 20 × Pale Gray
• 20 × Very Dark Muted Yellow
• 19 × Medium Gray
• 19 × Muted Yellow
• 18 × Dark Yellow
• 17 × Very Light Muted Orange
• 17 × Very Light Orange
• 16 × Very Dark Muted Orange
• 15 × Light Muted Red
• 15 × Light Muted Teal
• 15 × Mist Gray
• 14 × Muted Orange
• 13 × Light Cyan
• 13 × Light Muted Orange
• 13 × Silver Gray
• 12 × Very Dark Orange
• 11 × Light Orange
• 11 × Very Light Muted Green
• 10 × Very Light Red
• 9 × Dark Charcoal
• 9 × Dark Muted Orange
• 9 × Gray
• 9 × Light Gray
• 9 × Light Yellow
• 9 × Very Light Muted Red
• 8 × Dark Orange
• 8 × Light Silver
• 8 × Very Dark Muted Yellow Green
• 7 × Very Dark Yellow
• 6 × Dark Muted Red
• 6 × Light Muted Orange
• 6 × Very Light Muted Orange
• 5 × Light Muted Cyan
• 5 × Light Muted Green
• 5 × Light Orange
• 5 × Light Teal
• 5 × Muted Teal
• 5 × Very Light Muted Red
• 4 × Dim Gray
• 4 × Very Light Muted Green
• 4 × Very Light Muted Orange
• 4 × Yellow
• 3 × Charcoal
• 3 × Light Muted Rose
• 3 × Light Muted Rose
• 3 × Light Muted Yellow Green
• 3 × Light Red
• 3 × Very Dark Yellow Green
• 3 × Very Light Muted Blue
• 3 × Very Light Muted Green
• 3 × Very Light Red
• 3 × Very Light Yellow
• 2 × Light Muted Red
• 2 × Muted Orange
• 2 × Very Dark Muted Green
• 2 × Very Light Cyan
• 2 × Very Light Muted Yellow Green
• 2 × Very Light Teal
• 2 × Very Light Teal
• 1 × Dark Gray
• 1 × Dark Muted Cyan
• 1 × Dark Muted Purple
• 1 × Dark Muted Yellow Green
• 1 × Light Muted Blue
• 1 × Light Muted Green
• 1 × Light Muted Purple
• 1 × Light Rose
• 1 × Muted Cyan
• 1 × Orange
• 1 × Very Dark Muted Cyan
• 1 × Very Light Green
• 1 × Very Light Muted Cyan
• 1 × Very Light Muted Green
• 1 × Very Light Muted Magenta
• 1 × Very Light Muted Magenta
• 1 × Very Light Muted Purple
• 1 × Very Light Muted Rose
• 1 × Very Light Muted Teal
• 1 × Very Light Rose

Como fazer este padrão

1. Coloque a placa num lugar plano e separe as cores de contas listadas. Uma tigelinha por cor agiliza o posicionamento.
2. Posicione cada conta na placa seguindo o gráfico — trabalhe fileira por fileira para não se perder.
3. Cubra o design pronto com uma folha de papel manteiga ou de passar, bem plano sobre as contas.
4. Passe o ferro em temperatura média (cerca de 175 °C) por 10–15 segundos em círculos lentos até as contas fundirem uniformemente.
5. Deixe a peça esfriar completamente — cerca de 1 minuto — e depois retire o papel.
6. Para uma fusão mais firme, vire a peça e passe o ferro do outro lado da mesma forma. Isso se chama passar dos dois lados.

Dicas

• Sempre use papel manteiga. O contato direto com o ferro entorta as contas individualmente e destrói o espaçamento da grade.
• Mantenha o ferro se movendo em círculos lentos. Pressionar em um único ponto cria marcas na peça acabada.
• Coloque a peça fria no freezer por 30 segundos antes de retirar o papel — sai mais limpo assim.

Perguntas frequentes