128×127 grid · pixel art
About this pattern
This is a 128×127 pixel art pattern using 82 colors and 16256 beads. Difficulty is advanced and a typical project takes about 416 minutes including ironing. Open it in the maker to remix the palette across Perler, Hama, Artkal, or convert into a cross-stitch / pixel-art / LEGO grid.
Pattern stats
- Grid size
- 128×127
- Total beads
- 16256
- Colors
- 82
- Difficulty
- Advanced
- Time
- ~416 min
- Pegboard
- extended (tile multiple 50×50 boards)
Supplies
You’ll need 16256 beads across 82 colors, plus a pegboard, parchment paper, and a household iron.
- Pegboard (extended (tile multiple 50×50 boards))
- Iron + parchment / ironing paper
- 9028 × White
- 1703 × Black
- 704 × Light Muted Blue
- 577 × Very Light Muted Orange
- 545 × Light Muted Red
- 421 × Muted Cyan
- 282 × Off White
- 268 × Very Light Muted Orange
- 238 × Very Dark Gray
- 228 × Light Muted Orange
- 158 × Dark Charcoal
- 152 × Dim Gray
- 127 × Medium Gray
- 122 × Dark Gray
- 114 × Gray
- 114 × Near White
- 109 × Muted Blue
- 100 × Light Gray
- 100 × Light Silver
- 98 × Mist Gray
- 90 × Charcoal
- 89 × Pale Gray
- 78 × Muted Orange
- 76 × Silver Gray
- 71 × Very Light Muted Red
- 59 × Dark Muted Blue
- 55 × Dark Muted Cyan
- 53 × Light Muted Blue
- 37 × Dark Muted Orange
- 33 × Muted Red
- 31 × Light Muted Orange
- 28 × Very Light Muted Purple
- 27 × Very Dark Muted Cyan
- 26 × Very Dark Muted Blue
- 25 × Light Muted Orange
- 23 × Very Dark Muted Orange
- 20 × Dark Muted Rose
- 18 × Muted Orange
- 17 × Muted Orange
- 16 × Very Dark Muted Blue
- 16 × Very Dark Muted Red
- 13 × Very Light Muted Blue
- 12 × Very Dark Muted Rose
- 11 × Dark Muted Red
- 11 × Dark Muted Red
- 11 × Light Red
- 10 × Dark Muted Orange
- 10 × Very Dark Muted Red
- 8 × Very Light Muted Blue
- 7 × Dark Muted Orange
- 7 × Light Muted Red
- 7 × Very Dark Muted Orange
- 6 × Muted Rose
- 6 × Very Dark Muted Rose
- 6 × Very Light Muted Red
- 6 × Very Light Red
- 5 × Very Dark Muted Orange
- 4 × Muted Red
- 4 × Very Dark Muted Yellow
- 3 × Dark Red
- 3 × Very Dark Cyan
- 2 × Dark Blue
- 2 × Dark Muted Rose
- 2 × Dark Muted Yellow
- 2 × Light Muted Purple
- 2 × Light Muted Rose
- 2 × Light Muted Teal
- 2 × Red
- 2 × Very Dark Red
- 2 × Very Light Orange
- 1 × Dark Muted Magenta
- 1 × Dark Orange
- 1 × Light Muted Blue
- 1 × Light Muted Cyan
- 1 × Light Muted Green
- 1 × Light Red
- 1 × Red
- 1 × Very Dark Blue
- 1 × Very Dark Muted Magenta
- 1 × Very Dark Muted Teal
- 1 × Very Dark Orange
- 1 × Very Light Muted Rose
How to make this pattern
- Lay the pegboard flat and gather the bead colors listed above. A small bowl per color speeds placement.
- Place each bead on the pegboard following the chart — work row-by-row so you don’t lose your spot.
- Cover the finished design with a sheet of parchment or ironing paper, fully flat against the beads.
- Iron on medium heat (about 350°F / 175°C) for 10–15 seconds, moving in slow circles until beads fuse evenly.
- Let the piece cool fully — about 1 minute — then peel off the parchment.
- For a stronger fuse, flip the piece and iron the back side the same way. This is what we call double-sided ironing.
Tips
- Always use parchment paper. Direct iron contact warps individual beads and destroys the grid spacing.
- Keep the iron moving in slow circles. Pressing in one spot creates flat dimples in the finished piece.
- Pop the cooled piece in the freezer for 30 seconds before peeling parchment — it releases cleaner that way.
FAQ
How many beads do I need for the Yatta and Twisted Yatta! pattern?
You need 16256 beads total. The breakdown by color is: 9028 white, 1703 black, 704 light muted blue, 577 very light muted orange, 545 light muted red, 421 muted cyan. Stocking 10–20% extra of each color is a safe margin in case any beads are off-color or get crushed during ironing.
What size pegboard do I need?
A extended (tile multiple 50×50 boards) pegboard fits the 128×127 grid. The standard 29×29 Perler / Hama / Artkal square pegboard is the most common size and covers everything up to 29 cells across.
How long does it take to make?
Plan for about 416 minutes total — roughly 406 minutes placing the beads and another 10 minutes for ironing and cooling. Beginners may need 1.5× that on their first few patterns.
Can I use Hama or Artkal beads instead of Perler?
Yes. The colors used in this pattern map cleanly to Hama Midi, Artkal S, and Nabbi palettes. Open the design in the maker, switch the palette in the toolbar, then export the swapped chart before you start ironing.
Is this a beginner-friendly pattern?
This pattern is rated advanced based on grid size and color count. Beginner patterns are under 200 beads and 5 colors; intermediate is up to 600 beads and 10 colors; everything else is advanced.